Thursday, 19 March 2009

A cigar for bodes ?

Another clear night. I carted out the HEQ5 and followed my normal setup routine, and checked focus on Alnitak. I decided last night to have ago at M81 and M82. So before trying to find them this time, I rechecked my information. It took me a while to work out how to point the EQ mount at them, first off, I lined up, checked in my 24x80 finder and could see the grey haze, fired a test shot and yep, the Cigar was indeed there. It occured to me, that the position of the mount, with the scope moving down and the counter weight up, probably wasn't the best option, although by far the easiest to find them. So I slewed the mount around, and worked my way in to find them on the other side. I really struggled to get underneath enough and to get the scopes pointing in the right direction, but I got there in the end, but use of a camping mat and lying underneath it. Then a few tweaks for framing, a couple of test shots to check exposure times, yep up to 2 minutes at least. I decided 2 minutes and lots of subs rather than pushing too far on the sub length.

I took a few dark frames, set the timer remote for 30x2minutes and let it get on with it. When that was complete I took a few more dark frames, and set it all going again, this time aiming for 45 subs. Unfortunatly after only 29 subs the power gave up on me. I can't wait to get proper mains power in the garden. I took some more darks, then flats, and bought all the kit back in.

I popped all the frames in the stack, and set the dark multiplication factor. After reading some info yesterday about dark scaling, as long as you have bias shots, you can scale shorter darks up to the image shot duration, so taking 30s darks and multiplying by 4 in DSS. This was my first time trying this and it seems to have worked well. This of course means that 4 darks take the same time to capture as a single light frame meaning more time is spent capturing real data, cool.

Anyway, this is a first edit and needs some more work, but by the time I was done with the stack I was a bit tired to do much more.

59 x 120s @ISO800, 21 darks, 21 flats and 23 bias frames, log sqrt stretch in DSS then tweaked in PS

Photobucket

The arms in Bodes were much clearer in PS last night, not sure what's happened there...

I also added the Bias frames to a restack of my M3 shot from the other night... so here's the reedit

Photobucket

The kit is working well and I'm happy with the data collection capabilities. I need to finish off the EQmod cable, and get guiding running, then I'll be well away.

Tuesday, 17 March 2009

Phew It works

Another clear night. Another opportunity to check things out and see if I've still got the problem. During the day I'd found a couple of things wrong. Firstly, the head mount bolt was a little looser than necessary which mean the HEQ5 head wasn't tightly connected to the tripod head. Not a good thing, but not enough for it to fall off. I also found that one of the piggyback mounting nuts was loose, the addition of a spring washer and tightening it down solved that. So, all looking good fingers crossed.

I carted all the gear out, levelled using the Ambubble, set the PA setting circles, powered up and polar aligned. I also rigged up part of my camera safety fittings just in case. I need to work out a way of setting this up better, but I'm sure this would have worked if needed. I swung the mount using the clutches to point at Orions belt, and used the slew controls to centre Alnitak, then used this to focus, then balanced the mount. I decided then, that I'd go for a target I can find easily, so headed off to find The Beehive in Cancer. I used the 24x80 (Konus + 17mm Hyperion) finder and had a good look at the beehive, centred it in the camera viewfinder, removed the Hyperion, and took a test shot. 60 seconds was good, no trailing. 90 seconds also no trailing. Phew. I figured 90 seconds at ISO800 would do nicely, set the timer remote and let it do it's stuff. I had to gently apply the hair dryer a couple of times, but as dew was only just beginning to form on the lens, I was able to clear it in under the 10 seconds of the interval my timer remote is set for.

Whilst I was setting this up, at about 20:27, I saw something shoot across the sky, west to east at about Zenith. Far to fast for a Satellite.

I got out the 15x70's and had a little nose around. M44, had a look for M67, and I think I found it. M42. Then swung around, and following the instructions in TL@O I had a look for M3. I found it easily.

Once I'd captured my M44 data, changed camera battery and completed darks and flats. I swapped SD Card and unmounted the Frac combo, and mounted the Skymax 102 instead. It had been suggested on AC, that the little Mak would be very good with the 450d on a Globular cluster, and given where M3 was sitting, figured it was worth a go.

So I fitted the camera with the CLS filter, I'm not sure this was truly necessary with this setup, and will probably try this again without it. Focused using Saturn, grabbed a test shot, and was quite surprised at the result, considering this is a mammoth crop of a single frame

Photobucket

I set the timer remote for 60 second exposures @ISo1600 and went into to process the M44 data.

Whist the stack was running, I hadn't realised, but the power pack had run nearly flat, so the mount had stopped tracking. Oh Goody. This meant I only got 14 useable subs of M3. It looks like I'm limited to only 4 hours with the Maplin power tank. Maybe this is a dodgy battery, or a damaged battery, I don't know. So I grabbed the darks and flats, and cleared up.

After stacking the M44 data, I stretched the histogram with LogSqrt in DSS and tweaked a little in PS

Photobucket

The M3 data was also processed, but there were not enough lights. I also had some oddities when I used 7 flats with Vignetting going in the other direction, and a green colour cast, not had this before with the CLS after stacking.

Photobucket

I had a restack and used only 3 flats instead and that seems to have helped. I've also been able to remove the colour cast with tweaking.

Photobucket

The M3 data really needs more work in processing, but these are just a couple of quick rough edits, so I'll spend more time on it later. I'm glad everything is now working as I expected, and I've found what I hope is the cause.

Sunday, 15 March 2009

Horrible nights

Saturday night, whilst supposedly clear, and yes I could see a few stars, like Sirius, was murky overhead to the point that Sirius looked like a faded out spot, not the brightest star in the night sky... Well actually, I suppose it was still the brightest star in the night sky, after all it was about the only one I could see.

Tonight, after starting out the same way, finally cleared properly around 2230. I grabbed the HEQ5 and setup. I have a new ambubble level, so used that to level the mount off. Set the date/time circle on the polar scope and polar aligned. I used Saturn to focus on, when the rings are a lovely flat line at 10x on liveview, it's there. Balanced the mount. Then set off to find M67. Well I found M44 ok, using the clutches to point to the right patch of sky, then used the control to slew to M67, a few minutes and a couple of test shots later and no sign... Then it twigs, I went the wrong way... Ok. I came back in and grabbed the 25mm celestron ep. Popped it in the Konus diagonal and used that as a finder. Still nothing. This is silly. Anyway, I thought to myself, enough is enough.

So I headed off to look for the Leo Triplet. After a little time alinging on the right point in the sky, I took a test shot. 90 Seconds and the stars are trailing. What's going on ? This is the first time I've had trailing below 2.5 minutes. I checked and re polar aligned. Then as I was looking in that direction anyway, went looking for M81 and M82. Couldn't find them. I went back to the triplet, and I think this time I got the right place, but I'm still getting trailing at 90s. The mount is pretty level, given that the last time I got out, I didn't even bother to level and got 2.5 minutes I don't get this. Anyway by this point, I'd been outside over an hour, I'm feeling frozen, I've achieved nothing but frustration and some clouds were lurking around the North. I gave up, cleared up and came in.

Whether this is because of my little cable test with the USB TTL cable for guiding or not I just don't know. I completed the cable and tested it yesterday. All seemed to work ok, the mount responded as I was expecting, and I could control it happily from my PC. I plugged the handset back in and could slew happily too.

I did notice an odd vibration noise from the scope whilst the mount was tracking, I think the tube must have been amplifying it, and slewing at speed seemed noisier tonight. I don't know what's going on.

Wednesday, 11 March 2009

A couple more moons and a go at Saturn

Last night, was again clear, very surprising that was. I started out, with a quick shot with the Skymax 102 on the camera tripod

Photobucket

I couldn't resist colouring it

Photobucket

I then set the camera to jpg, continuous shooting and locked the shutter release remote. some 60 odd frames later I stopped it. I stacked the 61 frames and came out with

Photobucket

I little later on, the moon was higher, and the sky was still clear, I took the NexStar Skymax SLT out and set that up. I tried a few AVI's on the moon with the SPC900, but there's not enough contrast in them to stack properly. I had a go at Saturn, firstly just the webcam in the Skymax

Photobucket

Then had a try with the Ultima Barlow.

Photobucket

The blue lines are back, and it's got to be the gain causing it. I had to push up the gain. Anyway, considering how rubbish the seeing was lsat night, seeing the rings of Saturn was tricket it was that bad, I'm really rather pleased with these.

Tuesday, 10 March 2009

More Mooning around and a first Saturn of the year

Sunday was a real mixed bag of weather. Sunny, cloudy, rainy. There was a brief clear spell in the early evening, and once again, I popped the Skymax on my camera tripod, the 450d at prime and grabbed a shot of the moon against the blue sky.

Photobucket

The clear gap didn't last and within the hour it was raining again.

Anyway, as I was getting ready for bed, checking doors etc, I saw the sky had cleared so I grabbed the Skymax on the NexStar and dashed out for a short session. I used the webcam to capture a few sequences. Having messed up the alignment... The moonwash across the sky confused me, and I aligned on totally the wrong thing, the tracking was not as good as it can be, so the AVI's were quite short.

First up Aristarchus 231 of 256 frames
Photobucket

I pulled out a bit of colour too
Photobucket

Then I moved onto Gassendi 481 of 703 frames
Photobucket

I decided I'd have a pop at Saturn, this is all 274 frames
Photobucket

I'm not sure what caused the diagonal lines, the only thing I can think of, was I had the gain on the webcam up quite high. I've got some work to do on this, my laptop screen is always very dim when running on battery and that's making my job much harder to get the settings and focus right.

Anyway, thanks to CW on SGL, I've found a way to remove the lines, run a small Gaussian blur on it..
Photobucket

I also finally managed to get my frames from the 450d stacked into a 3 pane terminator mosaic. This was shot using the 2xTC on the 450d at prime on the Skymax. I had to convert the RAW frames to jpg before Registax 5 would play ball with them, it's still in Beta release though, so hopefully this will work better once fully released.
Photobucket

I really like the Skymax, it's working great for me.

Saturday, 7 March 2009

We saw a Double

On Friday evening, before the heavy clouds set in, I'd spotted a mag -7 flare prediction. I wasn't able to setup the satcatcher, but the family and I saw it. A good bright one that burnt through the thin cloud nicely. And amazingly, whilst it was beginning to fade a second one poked it's nose through the cloud at about the same brightness, slightly lower than the first. A lovely sight and the rest of the family were quite surprised and pleased to see the pair too.

Mooning around

I've had the opportunity over the past few days to use a Skymax 102. And amazingly the skies have played ball. It's a very compact little scope, which is pretty light, but with a stonkingly long focal length for the tube size, making it marvellous for the moon. As the scope didn't arrive with any accessories, I've put the celestron 6x30 finder on it, it seems to be working nicely so far.

Well in my normal way, having spotted the moon in the clear blue sky on Thursday, I popped the Skymax on a camera tripod, put the 450d at prime, no teleconverter needed here, as the focal length is 1300mm, and grabbed a shot. Focusing isn't the easiest of tasks, the focuser is mounted at right angles to my refractors, but I think I got to grips with it.

Photobucket

As the night drew in, the skies remained clear, so I mounted the Skymax on the NexStar, I have to say this is a very lightweight combination, which is a good thing, and went out for some playing with my webcam and some observing.

I had intended to have a go at getting some more of the Lunar 100 targets, but set the mount up too low, so I couldn't observe comfortably as it was hurting my back, I need to adjust a little more. Anyway what I did see through th 5mm Hyperion was quite astonishing (it overpowers the scope a bit, and I think I really need about a 6.5mm for optimum power, but it worked).

I put the webcam in, seeing wasn't too good, but I managed to achieve focus. And shot of a few sequences of avi's, they were stacking in Registax 5, with wavelets, then a small tweak in GIMP

A couple of Clavius
340 of 800 frames
Photobucket

866 of 2000 frames
Photobucket

Then onto the mountains...
Alpes 1378 of 1492 frames
Photobucket

and Apennines 526 of 652
Photobucket

I did try to get in even closer with the Ultima barlow, but everything became too wobbly to be able to focus. At that point, after a lot of trying with the Ultima, I gave up, popped the 450d with a 2xTC in and took some frames to try and stack with Registax 5. I've so far been able to get anywhere with doing this, it may be because it's in beta.

After capturing those, I gave up, ice was forming on everything including me.

Then yesterday afternoon, there were some cloud gaps, showing the moon nicely. So I once again grabbed the Skymax, popped it onto my camera tripod, and grabbed a shot with the 450d. I turned the camera a little to frame it better

Photobucket

I think this is a lovely little scope, and I will buy it for the price I've been offered for it.

Wednesday, 4 March 2009

Just a few Moon shots

The sky was a mixed bag last night. Clear spells with fast moving clouds sweeping through to blot everything out. I did manage to grab a couple of shots of the moon through holes, by mounting the scope on my camera tripod.

C80ED with a 2xTC @1200mm
Photobucket

And as there was some colour information showing through, I pulled out the colour
Photobucket

I've also been loaned a Skymax 102 to try out, it has a bit of a longer focal length (1300mm) and therefore doesn't need the TC, also being a shorter length tube, it's actually easier to use on the camera tripod. It's different to focus, and will take some playing with to get used to.

This has had a high pass sharpening filter applied.
Photobucket

And coloured too
Photobucket

I did put the Skymax on my NexStar (this makes a very light little combo) and set it up in the garden twice last night, only to find that within moments of getting aligned on the moon, the clouds moved in. So it's not really had anything like a proper test out as yet. One night soon hopefully.

Monday, 2 March 2009

Some Lunar shots and not the Leo Triplet

Saturday was back to normal, with a cloudy day. As the evening set in, it started to clear, leaving some thin, high level mist lurking. I took the opportunity, put the C80ED onto a camera tripod and used my camera and a 2xTC to grab some shots.

Photobucket

I took about 17 in total, and had a go at a stack. I used DSS (not ideal) to stack them. Registax 4 throws a fit at the 450d frames, and Registax 5, being a beta, also threw an error. I didn't have time to work that out. Anyway, I tried a few passes of high pass filter sharpening on it.

Photobucket

A little later on, and the mist had cleared, so I carted out the HEQ5, setup, polar aligned, I'm still surprised quite how easy this really is. As Leo was riding nice and high I thought I'd have a go at the Leo Triplet, a group of three galaxies in the belly of the Lion (ooh, I like that...). Anyway, after using Saturn to get focus, the usual liveview at 10x, I slewed around to about the right spot. Then spent the next 35 minutes trying to find them. I even used the 24x80 finder scope thingy I have mounted (my Konus and a 17mm Hyperion) but no joy. In the end, I fired a test frame and went looking for fuzzies. Yep, got one, centre of the frame. Hurray, thought I, set the timer remote and let it go to work. I'd set for 90x2.5 minute exposures... but after only about 90 minutes, the skies clouded over. I didn't get time to observe with the bins whilst the scope was doing it's stuff, mores the pity. I got a total of 36 frames @ISO1600, stacked in DSS with darks, flats and flat darks, then stretched in PS, for some reason, the DSS adjustments didn't seem to work so well.

Anyway, my Leo triplet image

Photobucket

It turns out, that whilst I've got 3 faint fuzzies on here, they are the wrong 3 faint fuzzies, and therefore not the triplet I was aiming for. This is M95 and M96 (much harder targets than M65 and M66 that I'd been wanting). The real triplet is a little ways off the right of the frame. Oh well. Next time. I'll also come back to this pair once I've sorted guiding out and can spend a lot longer on each frame.

Which should have turned out to be the following night, but my back was really hurting and I didn't feel up to carting the gear out. Instead I put the C80ED on a camera tripod again and grabbed a couple of shots of the moon.

The normal orientation

Photobucket

and I decided to try a portrait version as well.

Photobucket


A real shame about last night, the sky was so clear, but there'll be plenty more.

Friday, 27 February 2009

I looked, I saw, I shot

There was a break in the constant greyness that has blanketed the skies for most of the week, It only lasted an hour but I made the most of it.

First off, I setup the 15x70's on my camera tripod, and headed out to try and find this elusive comet that has been around for the past couple of weeks, Comet Lulin. I tried on Saturday, but failed. Anyway, after checking it's position on Heavens Above, I pointed the bins to roughly the right place, and with only a minor sweep, there it was. Excellent and one of those Wow moments.

With my excitement levels rising, I dashed inside, grabbed the HEQ5, carted it out. Plonked it down roughly pointing north, leveled and polar aligned it. I was setup in about 5 minutes, which I reckon is pretty good going, considering it's only my third attempt.

So all setup, mount running, I slewed around, using the clutches, to the right point in the sky, then realised, I hadn't checked my focus... Ah well, Saturn is nearby, thinks I. The ringed one, is a great object for focusing on, as the ring pops out cleanly when focused. So I slewed back, attmpted to line up on what I thought was the star near Lulin I'd been looking at in the bins, and fired a test shot. Hmm, no comet. I used the motor controls to sweep about a bit, and try and find it, but this wasn't helping either. Then it occured to me. The RDF is great, but only for general locating. Given I have my Konus piggybacked (needed for weight balancing) I wondered if it would make a good finder scope. So I grabbed the 17mm Hyperion, popped it in, quickly found the comet and centered it (quite some finder scope a 24x80). Tried a test shot. Hmm, not in the image. I adjusted around a little till I found it, and started shooting 2.5 minute frames. The 3 minute frame was showing signs of trailing.

I set the timer remote to capture 11x2.5 minute subs, and went back to the bins for a longer look. I thought I could clearly see, after studying the comet for a while, that it was changing position relative to the background stars. After watching for a while, I went and had a look at Saturn. Not an easy target at this low power, but the rings could just be made out. I kept glancing round, as a cloud bank was moving in from the north, and I have to say I was very lucky, as the first fingers of it, passed just under Leo and the area I was imaging in. However, it wasn't enough, and I had to stop after only 7 subs.

I then spent a few minutes, adjusting the Konus position, with some card wrapped in duck tape, propped between the OTA and tube rings, to get the collimation a little more accurate, I doubt very much this will be an issue for guiding, as long as I can find a star in the FOV, but as a finder scope, it's more useful, as I can use a diagonal and a decent ep, instead of the camera viewfinder, thus it's much more comfortable (wish I'd thought of that a couple of weeks ago, but that's another story).

Anyway, I cleared up and packed away. Here's a single 2.5 minute sub

Photobucket

The results of the Stack. DSS has a comet mode which I used. It appears to have done a double stack, one for the comet and one for the background stars. Anyway, 7x2.5 minutes, 32.5 minutes @ISO800

Photobucket

And an animation of the 7 frames, which clearly shows the movement of the comet relative to the background stars.

Photobucket

I'm really glad the weather broke and allowed me the opportunity to see and image Lulin, I had feared I was going to miss it altogether.

Monday, 23 February 2009

M42, M43, The Running Man and some Bino viewing

Saturday night was clear, after a day of clear skies, this was most unusual, and after the clear day I was expecting heavy clouds. Still, I wasn't going to look a gift horse in the mouth. I already knew what I was going to do, and at 1830, darkness setting in nicely, I carted the gear outside and setup. Early I know, but I wanted to make the most of it.

Plonked down the mount, powered up, went to polar align and realised as I was looking through the polarscope, I'd forgotten to set the axis for the correct date and time. So I did this (little did I know I got that simple task wrong, but more on that later). Polar aligned, swung around to Rigel, adjusted my RDF (I must have knocked it at some point) and focused the camera. I got focus, checked it with a test sub, then locked the drawtube, only to find, that tightening the focus lock, was enough to shift out focus... grr... Ok, loosened it a little and refocused. All set. I adjusted manually to the M42 region and shifted around with the tracking motors till I got the nebula just where I wanted it, taking framing shots as I went. I tested for longer exposures, but 2 minutes was all I could manage, I'd obviously messed something up, but couldn't see what. Ah well, 2 minutes it would be. I pushed the ISO to 1600 and set the camera gathering 2 minute subs, or so I'd thought. I'd set the camera to 30s, for my test shots, and forgot to set it back to bulb mode. I check it regularly, and noticed after only 17x30second subs, so I didn't lose too much time, and besides that would help with the core. I adjusted the camera, set the timer remote for 90 subs and set it all running.

My youngest wondered what I was up to, so we trotted out and I showed him. He was very surprised what I was getting when he looked at the preview screen on the camera. He wanted to have a bit more of a look around, so I grabbed the 15x70's popped them on a tripod and showed him some sights.

First off, M45, such a lovely sight in bins. I had him look both around the bins, and then through the bins, and he was astonished at the number of points of light in the darkness. So we went on a little tour of some of the grander sights, better suited for a 7 year old. M42, and he could see the glow easily enough. He wanted to look at that orange dot, so I pointed the bins to Betelguese for him, not really a lot different. I pointed out Orion and Gemini and the Big Dipper, nothing wrong with learning the constellations, should be easy for him. He asked me what that "twinkling bright star" was, a bit below Orion, ah said I, that's Sirius, the Dog Star, brightest star in our night sky. We had a quick discussion then about the distances involved, how Sirius is pretty close, the Pleiades, about 450ly's away, really meant we were looking back in time 450 years. He thought this was pretty cool. When I told him, how far away M31 was, he wanted to see that too. And was amazed we could see something so far away that the light we were looking at it left it 2.2 million years ago.

Then back closer to home, and the Beehive cluster (although, apparently it's the Beehive galaxy... a reference to Super Mario Galaxy, but quite sweet). And again, he was astonished by how many stars there are that you can't see without bins. Then onto M38, and more importantly the Smiley Face. I thought he'd like that one, and he did. Then a quick turnaround, back to the Big Dipper for a look at the Horse and Rider (he passed his Roman army eyesight test) and mummy came out to check. So we showed her the Pleiades and I think she was quite impressed, and we went inside. Where we spent a little while looking at the planisphere and explaining to him how to use it.

Time passes ....

I keep popping out and checking up on what's going on, all looking good. What I didn't notice, 2 hours into the run, was that the objective was dewing up, which I'm a bit miffed about as I lost an hours worth of data because of it (I tried to include them in the stack, but it made the result look unfocused). I noticed the mount power light was flashing, so I plugged the powertank into the mains (that wasn't one of my best conceived plans) putting the plug and power supply into a plastic box, in a bin bag.

The three hours up, I went back out to find, the powertank was no longer charging, nor doing anything for that matter, the mount had stopped moving altogether, the last three subs were a blurred mess. It turns out the power supply to the powertank had fried in the process of trying to keep things running. Damn. Thankfully I have another one I can use and it looks like the powertank has charged up again. I need to think my power supply out more carefully. I'm thinking, either a mains supply in a plastic tooldbox, or a leisure battery in the same housing.

Anyway, I downloaded the subs, stacked them, threw away that result as it looked out of focus, restacked without the subs with the dewed objective, threw the data from last week into the mix so I had 17x2mins @ISO800 (from last week), 17x30s @ISO1600 and 50x120s @ISO1600. I used 11 darks, 17 flats, and 15 dark flats, stacked in DSS with a Log(SQRT) stretch and tweaked in PS.

Photobucket

I'm done with this target for now. I don't think I'll be able to do much more with it, until I'm guiding or using a modded camera or both. I also managed to figure out the likely cause of the reduced sub length from last week. I messed up the align a little. I'd used the wrong time and was an hour out. Ah well. I'm really pleased with the end result though.

Sunday, 15 February 2009

A night under the stars

Friday night came around and it was clear. Not just clear, but really clear. Excellent. So after I'd done all that needed to be done, I headed out into the garden. I put the HEQ5 down, so the N leg was pointing roughly at North, powered up the mount (hoping that my power pack would last) and got on with polar aligning. A quick swing of the axis to set the current date and time, some minor adjustments on the Altitude and Azimuth bolts and I was there. I powered down, popped the camera on the scope, used the axis clutches to swing around to Sirius, powered up and used Sirius for focusing. The usual 10x liveview and adjust. Then to see what sort of exposure length I could do. Well first off I took a single 2 minute shot of Sirius

Photobucket

With that done, I used the clutches again to swing around to Orion and M42. I used the opportunity to grab a bunch of 2 minute subs of the area.

Photobucket

I'm really pleased with how this has come out, but it really needs more time on it, and darks (I forgot to take them).

Whilst I was capturing this data, I used my 15x70's and had a wander around, reacquainting myself with some friends from last year. I started with M35, then moved almost straight up, through M36, M37 and onto M38. In the FOV of the bins, M38, Mr Smiley, and I think the little fish were all visible. A very nice sight. Then, of course, how could I miss the sisters, onto M45 for a view of the gems on velvet, a lovely cluster, that I come back to as often as I can, and one I intend getting the HEQ5 and C80ED on at some point soon.

Then, swinging down and across, the faint glow in the middle of cancer that marks out the beehive caught my eye, so I had a good look at that too. Then back to Sirius and the clusters in that location. Spotting first off M41, then up and across to M46 and M47.

Then, the M42 data captured, I moved on to have a bash at M44. I swung around, tried to align as best as I could (not easy, as I had to half lie on the floor and sort of get my head between the tripod and the camera... Hmm... gonna have to do something about that. Anyway. I captured a couple of subs, and checked them. The cluster is too big for the C80ED to frame and some stars sit outside the frame, shame.

So I decided, as I'd seen it in the bins, that I'd have a crack at M41, here's the result

Photobucket

I really like the results here, the colours in particular.

Whilst this data was being captured, I had some more time with the Bins, on up to Mirfak and it's association, around a little more to look at the Double Cluster. Not easy now as it's playing peekaboo in the trees...

I then noticed that the Dipper had swung around and up, and had a look around for Mel 111, it took me a few minutes, but again found it and had a good look here. Then, with Leo rising above the rooflines, and a bright dot somewhat below, I swung the bins onto it, and there was Saturn. Always an impressive sight, but tricky to see in handheld 15x70's.

I then moved back to Orion and had a good look at him. M42 being the obvious one, and a patch of grey, sort of birdy shaped mistiness. Up to the belt and I think it's a Struve cluster around the centre star, and the same around Orion's head (although I can't remember the names or the numbers).

I noticed as I finished capturing the data for M41 that the objective was misting up, so I grabbed the OH's hair dryer and gave it a very gently fanning to clear the mist, adjusted the mount to point to Alnitak, and tried to see how far I could push. At 4 minutes, trailing was beginning to creep in, so that was a bit far, I dropped back to 3 minutes (although I could probably have got away with 3.5 mins), pushed the ISO up to 1600, and set about trying to capture the horse head and flame. Having set the timer remote, I went in for a cuppa and to warm up leaving the gear running. This really needs an entire session devoted to it, with an unmodded camera it takes some serious time to capture, and even then it's very very faint, but it's there.

Photobucket

I'm really pleased with this session, it's proved the mount and scope are very capable and opens up huge amounts of possibilities.

Tuesday, 10 February 2009

Lunar Panoramics and testing the mount

Finally, after nearly 2 weeks, I got the HEQ5 out for a session. Plonked it down, I was able to carry the entire thing all bolted together which is something, with the N leg in about the right direction, plugged in, swung the scopes to open the polar scope hole, swinging the dec (??) axis to set the current date and time on the circles, and started to polar align (I'd been dreading this bit, as I've got how important this bit is).

Anyway, I was having some difficulty polar aligning, I couldn't see Polaris, so I double checked and whilst I thought I'd set the altitude to 51degrees, I was sadly mistaken, quickly rectified that, and Polaris slipped into the FOV. Some adjustments on the bolts, Polaris slid into the correct point on the reticule. I have to say that the red illumination made this very easy.

The moon was up, so I swung around to that. Shifting each axis and getting closer with each move. It took a few moments, as the movements were peculiar, but I don't think it's going to take long to get used to this mode of movement.

I had a quick look with the 5mm Hyperion and Ultima barlow and I have to say, the view, once focused was superb. I did notice that I didn't have to wait anywhere near as long for the vibrations to settle, that's much better. Then I had a few goes at imaging the moon, I used the 2x Ultima Barlow (now how did that get bought, must have fallen in the basket when I ordered the mount) and as this gives about 2.5x with the 450d, I shot two frames and made a vertical panoramic out of it.

Photobucket

Then as there was some colour data in there, pushed up the saturation

Photobucket

I then swapped to the SPC900 (with the contrast booster attached) for some webcam attempts around Langrenus

With the Ultima, about 400 of 600 frames
Photobucket

And Colourised a little
Photobucket

As the seeing was so rough, I took out the barlow and just used the webcam, about 1200 of 1800 frames
Photobucket

Then as I was swinging around to look for Saturn, the power pack gave up and the mount wouldn't track or slew anymore. A quick check of the gauge and it showed as flat as a pancake. Serve me right for not charging it back up after playing with the movement controls a few times.

I have to say I needed that. The mount is far easier to setup and align than I thought it would be, and the same is true for the movement controls. Hopefully I'll get a few clear nights so I can test it out further.

Monday, 9 February 2009

The moon

Due to illness and the weather, I've not been out to look at anything for a while, I was able to get just a single shot of the moon, through the C80ED with a 2xTC

Photobucket